Wood Primer is a good, general purpose solvent-based primer suitable
for use on all types of soft and hard woods, inside and outside. Wood that is highly
resinous should be primed with Aluminium Wood Primer.
Softwoods & Hardwoods
For Interior & Exterior Use
Helps Provide Excellent Adhesion
Suitable for use on interior and exterior use on
soft and hardwoods.
1L, 2.5L and 5L.
Pigment: Titanium Dioxide and Inert Mineral
Binder: Oil Modified Alkyd.
Solvent: White Spirit.
To get the best results, ensure surfaces to be
painted are sound, clean and dry (new surfaces
particularly must be fully dry) and free from all
defective or poorly adhering material such as dirt,
grease and wax.
Thoroughly rub down previously painted surfaces,
using ‘wet flatting’ methods where possible, then
wipe off with a damp, lint free cloth. Special
precautions should be taken during surface
preparation of pre-1960s paint surfaces over
wood and metal as they may contain harmful
Treat any knots in wood with an appropriate
Any surface defects should be filled with an
appropriate Polycell Trade Polyfilla.
STIR THOROUGHLY BEFORE USE. After suitable
surface preparation, apply 1 coat of Dulux Trade
Wood Primer to all bare wood and allow to dry.
Finish with an appropriate Dulux Trade paint
Brush only. For Health & Safety reasons relating
to all solvent-based paints, spray application is
As with all solvent-based paints, do not apply at
temperatures below 5ºC (as recommended by
British Standard BS 6150).